HSG47 is the HSE guidance document titled Avoiding Danger from Underground Services. It provides advice for anyone responsible for planning, managing or carrying out excavation work where underground services may be present.
The guidance focuses on a safe system of work built around three important stages:
- Planning the work: Before excavation begins, available service drawings and information should be obtained and reviewed. The work area should be assessed to identify potential underground hazards.
- Locating and identifying services: Appropriate detection equipment should be used to help locate buried services. Information from service plans should be considered alongside the results of detection surveys.
- Safe excavation: Digging should be carried out carefully, using suitable methods and precautions to reduce the chance of damaging underground services.
Following these stages helps make sure underground hazards are considered before work starts, rather than relying on workers to identify services once excavation is already underway.
HSG47 is particularly relevant to groundworkers, utility contractors, civil engineering teams and anyone involved in breaking ground.
Why Are Underground Services So Dangerous?
Underground services are not always easy to identify. Some may be poorly recorded, positioned differently from the available drawings or located close to other buried infrastructure.
Without proper planning and detection, excavation work can put workers and members of the public at risk.
Some of the main hazards include:
Electricity cables
Striking a live electricity cable can cause electric shock, severe burns and potentially fatal injuries. Even work close to a damaged cable can present serious danger.
Gas pipes
Damaging a gas pipe can cause a leak, creating the risk of fire or explosion. Gas releases can also present health risks depending on the circumstances.
Water pipes
Hitting a water main can cause flooding, damage surrounding structures and disrupt water supplies. Pressurised water can also create dangerous working conditions.
Telecommunications cables
Damage to telecommunications infrastructure can interrupt essential services and lead to expensive repair work.
These risks highlight why safe digging procedures are important. Workers should never assume that an area is clear simply because no services are visible above ground.
CAT & Genny: Putting HSG47 Into Practice
One of the practical ways workers can help identify underground services is by using a Cable Avoidance Tool (CAT) and signal generator (Genny).
A CAT detector is used to detect signals associated with buried services. The Genny can apply a signal to certain services, helping the CAT locate them more effectively.
Together, these tools can help workers investigate an excavation area and identify potential underground hazards before digging starts.
However, CAT and Genny equipment has limitations. Not every buried service will produce a detectable signal and results can be affected by the type of service, its depth, surrounding conditions and how the equipment is used.
For this reason, detection equipment should be used alongside service drawings, site information and other precautions. It should not be treated as a guarantee that an area is free from underground services.
Knowing how to operate a cable avoidance tool correctly is an important part of safe digging practices.
CAT and Genny training helps workers understand how detection equipment works, how to interpret signals and how to use the equipment as part of an excavation safety procedure.
Training can cover areas such as:
- Understanding the purpose and operation of CAT and Genny equipment.
- Identifying potential underground services before excavation.
- Using detection equipment correctly.
- Understanding the limitations of cable avoidance tools.
- Applying safe working practices when preparing for excavation.
Developing these skills can help workers make more informed decisions before and during groundworks.
Who Needs HSG47 and Excavation Training?
HSG47 is relevant to a wide range of people involved in work that could disturb the ground.
This includes:
- Groundworkers and excavation operatives.
- Utility and infrastructure contractors.
- Civil engineering workers.
- Construction site supervisors.
- Workers involved in installing or repairing underground services.
- Anyone responsible for planning or managing excavation activities.
Employers should consider the type of work being undertaken, the risks involved and the level of competence required when deciding what training their teams need.
Excavation training and CAT and Genny training can help workers develop the practical knowledge needed to recognise underground hazards and work more safely around buried services.
One Stop Safety Training provides training options for workers looking to develop their excavation and underground service detection skills.
Find out more about the EUSR Excavation course at One Stop Safety Training.
Book EUSR Excavation Training
Understanding HSG47 is an important part of avoiding danger from underground services, but workers also need the appropriate knowledge and practical skills to apply safe digging procedures on site.
Whether you work in groundworks, utilities or civil engineering, suitable training can help you understand excavation risks, identify underground services and use detection equipment as part of a safe system of work.
One Stop Safety Training offers EUSR Excavation training to help workers develop the knowledge and skills relevant to excavation activities.
To find out more about course content and training options, visit our EUSR Excavation course page or contact the team to discuss your training requirements.